Leg Workouts For Men:

1. Barbell Squat

1. Begin with the barbell supported on top of the traps. The chest should be up and the head facing forward. Adopt a hip-width stance with the feet turned out as needed.
2. Descend by flexing the knees, refraining from moving the hips back as much as possible. This requires that the knees travel forward. Ensure that they stay align with the feet. The goal is to keep the torso as upright as possible.
3. Continue all the way down, keeping the weight on the front of the heel. At the moment the upper legs contact the lower legs reverse the motion, driving the weight upward.

2. Leg Press

1. Using a leg press machine, sit down on the machine and place your legs on the platform directly in front of you at a medium (shoulder width) foot stance. (Note: For the purposes of this discussion we will use the medium stance described above which targets overall development; however you can choose any of the three stances described in the foot positioning section).
2. Lower the safety bars holding the weighted platform in place and press the platform all the way up until your legs are fully extended in front of you. Tip: Make sure that you do not lock your knees. Your torso and the legs should make a perfect 90-degree angle. This will be your starting position.
3. As you inhale, slowly lower the platform until your upper and lower legs make a 90-degree angle.
4. Pushing mainly with the heels of your feet and using the quadriceps go back to the starting position as you exhale.
5. Repeat for the recommended amount of repetitions and ensure to lock the safety pins properly once you are done. You do not want that platform falling on you fully loaded.

3. Leg Extensions

1. For this exercise you will need to use a leg extension machine. First choose your weight and sit on the machine with your legs under the pad (feet pointed forward) and the hands holding the side bars. This will be your starting position. Tip: You will need to adjust the pad so that it falls on top of your lower leg (just above your feet). Also, make sure that your legs form a 90-degree angle between the lower and upper leg. If the angle is less than 90-degrees then that means the knee is over the toes which in turn creates undue stress at the knee joint. If the machine is designed that way, either look for another machine or just make sure that when you start executing the exercise you stop going down once you hit the 90-degree angle.
2. Using your quadriceps, extend your legs to the maximum as you exhale. Ensure that the rest of the body remains stationary on the seat. Pause a second on the contracted position.
3. Slowly lower the weight back to the original position as you inhale, ensuring that you do not go past the 90-degree angle limit.
4. Repeat for the recommended amount of times.

4. Dumbbell Walking Lunge

1. Begin standing with your feet about hip-width apart and holding dumbbells in your hands down by your side. This will be your starting position.
2. Step forward with one leg, flexing the knees to drop your hips. Descend until your rear knee nearly touches the ground. Your posture should remain upright, and your front knee should be in line with your front foot. Do not allow your front knee to go forward beyond your toes as you come down, as this will put undue stress on the knee joint.
3. Drive through the heel of your lead foot and extend both knees to raise yourself back up.
4. Step forward with your rear foot, repeating the lunge on the opposite leg.

5. Goblet Squat

1. Stand holding a light kettlebell by the horns close to your chest. This will be your starting position.
2. Squat down between your legs until your hamstrings are on your calves. Keep your chest and head up and your back straight.
3. At the bottom position, pause and use your elbows to push your knees out. Return to the starting position, and repeat for 10-20 repetitions.

6. Hack Squat

1. Place the back of your torso against the back pad of the machine and hook your shoulders under the shoulder pads provided.
2. Position your legs in the platform using a shoulder width medium stance with the toes slightly pointed out. Tip: Keep your head up at all times and also maintain the back on the pad at all times.
3. Place your arms on the side handles of the machine and disengage the safety bars (which on most designs is done by moving the side handles from a facing front position to a diagonal position).

7. Lying Leg Curls

1. Adjust the machine lever to fit your height and lie face down on the leg curl machine with the pad of the lever on the back of your legs (just a few inches under the calves). Tip:Preferably use a leg curl machine that is angled as opposed to flat since an angled position is more favorable for hamstrings recruitment.
2. Keeping the torso flat on the bench, ensure your legs are fully stretched and grab the side handles of the machine. Position your toes straight (or you can also use any of the other two stances described on the foot positioning section). This will be your starting position.
3. As you exhale, curl your legs up as far as possible without lifting the upper legs from the pad. Once you hit the fully contracted position, hold it for a second.
4. As you inhale, bring the legs back to the initial position. Repeat for the recommended amount of repetitions.

8. Standing Calf Raises

1. Adjust the padded lever of the calf raise machine to fit your height.
2. Place your shoulders under the pads provided and position your toes facing forward (or using any of the two other positions described at the beginning of the chapter). The balls of your feet should be secured on top of the calf block with the heels extending off it. Push the lever up by extending your hips and knees until your torso is standing erect. The knees should be kept with a slight bend; never locked. Toes should be facing forward, outwards or inwards as described at the beginning of the chapter. This will be your starting position.
3. Raise your heels as you breathe out by extending your ankles as high as possible and flexing your calf. Ensure that the knee is kept stationary at all times. There should be no bending at any time. Hold the contracted position by a second before you start to go back down.
4. Go back slowly to the starting position as you breathe in by lowering your heels as you bend the ankles until calves are stretched.
5. Repeat for the recommended amount of repetitions.

9. Seated Calf Raise

1. Sit on the machine and place your toes on the lower portion of the platform provided with the heels extending off. Choose the toe positioning of your choice (forward, in, or out) as per the beginning of this chapter.
2. Place your lower thighs under the lever pad, which will need to be adjusted according to the height of your thighs. Now place your hands on top of the lever pad in order to prevent it from slipping forward.
3. Lift the lever slightly by pushing your heels up and release the safety bar. This will be your starting position.
4. Slowly lower your heels by bending at the ankles until the calves are fully stretched. Inhale as you perform this movement.
5. Raise the heels by extending the ankles as high as possible as you contract the calves and breathe out. Hold the top contraction for a second.
6. Repeat for the recommended amount of repetitions.

10. Donkey Calf Raises

1. For this exercise you will need access to a donkey calf raise machine. Start by positioning your lower back and hips under the padded lever provided. The tailbone area should be the one making contact with the pad.
2. Place both of your arms on the side handles and place the balls of your feet on the calf block with the heels extending off. Align the toes forward, inward or outward, depending on the area you wish to target, and straighten the knees without locking them. This will be your starting position.
3. Raise your heels as you breathe out by extending your ankles as high as possible and flexing your calf. Ensure that the knee is kept stationary at all times. There should be no bending at any time. Hold the contracted position by a second before you start to go back down.
4. Go back slowly to the starting position as you breathe in by lowering your heels as you bend the ankles until calves are stretched.
5. Repeat for the recommended amount of repetitions.